Mannu
4fc7893d28
- home-assistant/: HA Core + matter-server, host networking (home box, not Dokploy) - ha-proxy/: nginx reverse-proxy, ha.manohargupta.com -> home HA over Tailscale - dual-homed (dokploy-network ingress + bridge egress), mirrors n8n pattern
46 lines
2.3 KiB
YAML
46 lines
2.3 KiB
YAML
# ============================================================================
|
|
# Home Assistant + Matter Server -- runs on the HOME BOX (Pi 5 / N100)
|
|
# ----------------------------------------------------------------------------
|
|
# THIS DOES NOT RUN ON HETZNER / DOKPLOY.
|
|
# It lives in the infra repo for source-control + documentation, but it is
|
|
# deployed by hand on the home machine: `docker compose up -d`
|
|
#
|
|
# WHY host networking (network_mode: host) is mandatory here:
|
|
# - Tapo cameras are reached over your LAN (RTSP 554 / ONVIF 2020). HA must
|
|
# sit on the same L2 segment to discover + stream them.
|
|
# - mDNS / SSDP / Matter commissioning are MULTICAST. Bridge networking
|
|
# drops multicast at the container boundary, so discovery silently fails.
|
|
# With host mode the container shares the home box's network stack directly.
|
|
# ============================================================================
|
|
services:
|
|
homeassistant:
|
|
image: ghcr.io/home-assistant/home-assistant:stable
|
|
container_name: homeassistant
|
|
restart: unless-stopped
|
|
network_mode: host # see header note -- non-negotiable for HA
|
|
volumes:
|
|
- ./config:/config # all HA state + configuration.yaml lives here
|
|
- /etc/localtime:/etc/localtime:ro
|
|
- /run/dbus:/run/dbus:ro # lets HA see host Bluetooth/dbus (harmless if unused)
|
|
environment:
|
|
- TZ=Asia/Kolkata
|
|
# NOTE: no `ports:` needed -- host mode already exposes :8123 on the box.
|
|
# NOTE: no `privileged` -- only required if you later pass a USB Zigbee/Thread
|
|
# dongle, which would also need a `devices:` mapping. Not needed for
|
|
# WiFi / RTSP / Matter-over-WiFi devices.
|
|
|
|
# --- Matter controller (you mentioned Matter devices) -------------------
|
|
# HA talks to this over ws://localhost:5580 (add the "Matter" integration in
|
|
# the HA UI and point it there). Comment this whole block out if you want to
|
|
# hold off on Matter for now -- Tapo cameras do NOT need it.
|
|
matter-server:
|
|
image: ghcr.io/home-assistant-libs/python-matter-server:stable
|
|
container_name: matter-server
|
|
restart: unless-stopped
|
|
network_mode: host # Matter commissioning needs multicast too
|
|
security_opt:
|
|
- apparmor=unconfined # required for the Matter stack's raw network access
|
|
volumes:
|
|
- ./matter-data:/data
|
|
environment:
|
|
- TZ=Asia/Kolkata
|